Many classic cars were originally 6 V. Converting to 12 V improves starting and lighting, and lets you use modern accessories. It is a common conversion, provided you deal with the whole system and not just the battery.
1. Battery and charging
You need a 12 V battery and a 12 V charging system: a 12 V dynamo, or preferably a dynamo-look alternator or an alternator, with the matching regulator.
2. Lighting and bulbs
Every bulb must be changed to 12 V: headlights, lamps, indicators, warning lights and dashboard lighting. Don't forget the flasher unit.
3. Ignition
The coil must be 12 V (or used with a ballast resistor if it is designed for one). Check the condenser, and consider taking the opportunity to switch to electronic ignition.
4. Starter motor and electric motors
A 6 V starter will often work on 12 V for short bursts, but it spins faster and wears more quickly: a 12 V starter motor is the long-term solution. Wiper motors, heater fans and electric fuel pumps also need to be converted.
5. Gauges
Gauges and instruments designed for 6 V cannot cope with 12 V: replace them or fit a voltage reducer suited to your instruments.
6. Polarity
Many classic vehicles are positive earth. Converting to 12 V is often the moment to switch to negative earth, but every polarity-sensitive component (charging system, radio, electronics) must then be adapted.
7. Wiring harness and protection
Check the condition of the wiring harness and add fuses and relays where there are none. A damaged old harness is the number one cause of breakdowns after a conversion.
Every vehicle has its own quirks. Before you start, contact us with the make, model and year: we will help you draw up the list of parts you need.
.webp)
