Fausse dynamo AC Ace moteur Bristol
  • Fausse dynamo AC Ace moteur Bristol

Plymouth P7 & P8 1939 dynamo-look alternator

LMDPLY001
€897.84
Tax included

€748.20 tax excl.

Earth
Voltage
Quantity
False dynamo for Plymouth P7 & P8 1939Replace yourdynamo Plymouthby Dynator (also called Dynalite), an alternator in a dynamo body. You keep the external appearance while enjoying advanced technology and reduce by half the original weight.This alternator starts instead of the original dynamo and comes ready to use with its regulator and its adapted pulley.English manufacture.Available in 6V and 12V (selection below) / 65AmpAvailability: Product assembled to order, average of 5 days.

Plymouth P7 & P8 1939 dynamo-look alternator

Fake dynamo for Plymouth P7 & P8 1939. This fake dynamo (also called Dynator or Dynalite) is an alternator hidden inside a dynamo body: you keep the original external look while benefiting from modern technology, at half the weight.

Benefits

  • Original external appearance retained
  • Half the weight of the original dynamo
  • This alternator fits in place of the original dynamo and is supplied ready to use with its regulator and matching pulley

Specifications

  • Made in England
  • Available in 6 V and 12 V (choose when ordering) / 65 A

Compatible vehicles

This dynamo-look alternator fits in particular the following vehicles:

  • Dodge D12 1939
  • Dodge D14 / D17 1940
  • Plymouth P7 & P8 1939

Available versions

  • Negative or positive earth (state when ordering: unlike a dynamo, a dynamo-look alternator is polarity sensitive)
  • 90 A high-output version on request (output achieved at higher rpm)
  • 95 A Super Duty version on request (high output at low rpm, 5" body diameter)
  • 170 A Super Duty high-output version on request

Contact us for these versions.

Fitting

  • Pulley / drive: WOSP part LMP027 – aluminium 17 mm V pulley, 87 mm outside diameter, 13.5 mm pitch (also sold separately in our shop)
  • Starts charging at about 1250 rpm (dynamo-look alternator speed)

Pitch (WOSP measurement) is the distance from the rearmost part of the pulley's mating face to the start of the belt channel.

See the instructions and wiring diagrams for a dynamo-look alternator.