Wiring diagram for universal electronic kit, negative earth
  • Wiring diagram for universal electronic kit, negative earth

Wiring diagram for universal electronic kit, negative earth

Quantity

Free fitting diagram for the universal electronic ignition kit, negative earth, replacing the contact points.

Universal electronic ignition kit fitting diagram – negative earth

This free diagram shows how to wire our universal electronic ignition kit on a negative earth vehicle.

Connections

  • Yellow wire: coil negative (–) terminal.
  • Red wire: coil positive (+) terminal.
  • Black wire: chassis earth, on a bare metal area free of paint and corrosion.
  • Blue wire: connect to the wire coming from the contact points.
  • Coil: must be fed from the key switch on the + terminal.
  • Condenser: it must be removed, otherwise the kit will not work properly.

Warning

This system must be used with a coil of the same type as the original (3 ohms primary in 12 V). We recommend part number 5D20 in 12 V and 5D30 in 6 V. Do not use a more powerful coil or a coil for electronic ignition. Do not leave the ignition on when the engine is stopped. Incorrect fitting or use will void the warranty.

Useful parts