Allumage électronique Benelli 250/4, 254
  • Allumage électronique Benelli 250/4, 254
  • Allumage électronique Benelli 250/4, 254

Electronic ignition Kawasaki Z250

AEMOKA1
€230.00
Tax included

€191.67 tax excl.

Quantity

Electronic ignition for Kawasaki Z250 bi cylinders

This device replaces the contact points and condenser with a contactless system triggered by a light beam.

This device generally consists of three main components:

1. An adapter plate carrying the infrared light-beam systems (one per cylinder), which are interrupted by the rotor as it turns on the engine cam or crankshaft.
When a light beam is interrupted by a rotor vane, the electronic module fires the coil. (some systems are mounted separately with one adapter per infrared unit, not necessarily all on a single adapter).
The adaptation kit also includes the parts needed to fit the lamps around the motorcycle cam or the crankshaft.

2. A rotor that fits onto the motorcycle cam or the crankshaft and interrupts the infrared beam to fire the coil.
This rotor can be metal or plastic resistant to heat and solvents.

3. An electronic module that picks up the signals from the rotor and triggers the coil.
It can be powered with positive or negative earth depending on your motorcycle's configuration and has a separate switching channel for each infrared system.
The module is available in 6 and 12V and therefore suits classic motorcycles.
It has an LED timing light.

4. A wiring loom is supplied with each kit, matching the dimensions, connectors and wire colours of the motorcycle's original wiring for a quick, easy and professional installation.
The system requires standard tools and is easy to install.

Please note that the primary resistance of the ignition coil must be at least 3 Ohms (many motorcycle coils are 4 Ohms or more)
Please also note that the system does not include any ignition advance or retard function and relies on the mechanical advance and retard mechanism originally fitted to the motorcycle.

Availability: En stock

Electronic ignition Kawasaki Z250

Electronic ignition for Kawasaki Z250 bi cylinders. This device replaces the contact points and condenser with a contactless system triggered by a light beam. This device generally consists of three main components: 1. An adapter plate carrying the infrared light-beam units (one per cylinder), whose beams are interrupted by the rotor as it turns on the engine cam or crankshaft.

Additional information

  • When the light beam is interrupted by a rotor blade, the electronic module fires the coil. (Some systems are fitted separately with one adaptor per infrared system, rather than all systems on a single adaptor)
  • The adaptation kit also includes the parts needed to fit the lamps around the motorcycle's cam or crankshaft
  • 2. A rotor that fits on the motorcycle's cam or crankshaft and interrupts the infrared beam to trigger the coil
  • This rotor can be metal or heat- and solvent-resistant plastic
  • 3. An electronic module that reads the rotor signal and fires the coil
  • It can run on positive or negative earth depending on your motorcycle's set-up, with a separate switching channel for each infrared system
  • The module is available in 6 and 12 V, so it suits older motorcycles
  • It has an LED timing indicator
  • 4. A wiring loom is supplied with each kit, matching the dimensions, connectors and wire colours of the motorcycle's original wiring for a quick, easy and professional installation
  • The system needs only standard tools and is easy to install
  • Please note that the primary resistance of the ignition coil must be at least 3 Ohms (many motorcycle coils are 4 Ohms or more)
  • Please also note that the system has no ignition advance or retard function of its own and relies on the motorcycle's original mechanical advance and retard mechanism